Brand
Badger OrdnanceBadger Ordnance 4
Daniel DefenseDaniel Defense 1
Dead Air ArmamentDead Air Armament 4
EOTechEOTech 1
Knights ArmamentKnights Armament 1
Lancer SystemsLancer Systems 1
MagpulMagpul 1
Reptilia CorpReptilia Corp 1
Sons of Liberty Gun WorksSons of Liberty Gun Works 2
Spiritus SystemsSpiritus Systems 6
TrijiconTrijicon 1
Troy IndustriesTroy Industries 1
VG6 PrecisionVG6 Precision 3
Color
- BlackBlack 24
- Flat Dark Earth (FDE)Flat Dark Earth (FDE) 5
- TanTan 2
- Opaque BlackOpaque Black 1
- Translucent Clear 1
- Translucent Dark Earth 1
- Translucent Smoke 1
- GrayGray 1
- SandSand 1
- OD GreenOD Green 1
- Wolf GreyWolf Grey 1
- Coyote BrownCoyote Brown 2
- Ranger GreenRanger Green 3
MulticamMulticam 5
Multicam AridMulticam Arid 1
Multicam BlackMulticam Black 2
Multicam TropicMulticam Tropic 1
WoodlandWoodland 1
HK 416 / MR556
Badger Ordnance Condition One 34mm Scope Mount – 20MOA – 1.54″
In stock
$308.82This variant of C1 Modular Mount is 1.54” which is the common height of in-line Night Vision Devices and commonly used in precision applications. For shooters who prefer a lower and more optimum cheek-weld while still maintaining direct pass-through of Night Vision Devices. Made from 7075-T6 aluminum Type III Hard Coat Anodized Black. Weight 5.0 oz.
The mount cants from the forwardmost cross-bolt to the rear of the front ring.
- Cant: 20 MOA/5.8 MRAD
- Height: 1.54″ (Tall Height)
- Diameter: 34mm
- Weight: 5.0 oz.
- Material: Made from 7075-T6 aluminum
- Finish: Type III Hard Coat Anodized
USED – Spiritus Systems 5.56/.223 Rifle Magazine Insert – Single
Out of stock
$20.19The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one.
- Easy access to your magazines while providing excellent retention.
- Fits into either pocket on the Micro Fight Chassis MK 3.
- Quiet when removing or adding magazines.
USED – Spiritus Systems 5.56/.223 Rifle Magazine Insert – Triple
Out of stock
$24.31The 5.56 Rifle Triple Insert is an elastic custom insert that fits 3 magazines.
- Elastic is very quiet when removing or adding magazines.
- Quick and easy access to your magazines while providing excellent retention.
- Elastic will not deform due to heat over time.
- The magazine insert is retained by hard Hook/Loop sewn to both sides.
- Dimensions: 9″ x 4″
USED – Spiritus Systems Placard 5.56 X .45
Out of stock
$46.41 – $47.17The LV Placard was designed to give users superior retention of magazines and other mission-critical equipment.
- Attach the included ITW Nexus hardware to turn your placard into a Nano-sized chest rig.
- The back of the placard is fully lined with a hard loop field for secure fitment to your plate carrier.
- The elastic creates form-fitting cells that can hold a variety of different items.
- Elastic allows it to expand to accommodate large or oddly shaped pieces of equipment.
- Features webbing at the base of the system instead of sewing it completely shut.
- Laminate loops on the outside of each cell to allow for the attachment of retention loops.
USED – Magpul MOE SL Carbine Stock (Mil-Spec) for AR15/M16
Out of stock
$48.35The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.
- Platform: AR-15, M4, M16, AR-10, LR-308, SR-25
- Compatibility: Mil-Spec extension tube (not included)
- Material: Polymer
- LOP, M4 Collapsed ~10.8 in.
- LOP, M4 Extended ~14.1 in.
- LOP Adjustment Range 3.3 in.
- Length, max 7.2 in.
- Weight 9.6 oz.
USED – Dead Air Armament Xeno Flash Hider – (1/2×28)
In stock
$74.11The Xeno Flash Hider works superbly as a stand-alone muzzle device, but really shines when paired with the Xeno Adapter equipped suppressor.
- Excellent suppressor host
- Caliber: 5.56 / .223
- Thread Pitch: 1/2×28
- Material: 4140 steel
- Finish: Black Nitride
- Length: 2.16″
- Weight: 3.2 oz.
USED – Dead Air Armament Xeno Muzzle Brake – (1/2×28)
In stock
$75.33The Xeno Brake is the next evolution to the Xeno Mounting System. This omni-directional brake has exceptional performance when running unsuppressed without disturbing everyone around you, but really shines when paired with the Xeno Adapter equipped suppressor.
- Excellent suppressor host
- Superb stand alone muzzle brake
- Caliber: 5.56 / .223
- Thread Pitch: 1/2×28
- Material: 4140 steel
- Finish: Black Nitride
USED – Reptilia Corp AUS 34mm Optic Mount
Out of stock
$219.24Introducing the AUS Mount for 34mm diameter magnified optics, from Reptilia.
- Material: 7075-T6 aluminum
- Finish: Type III hardcoat anodized
- 34mm rings
- 1.54 inch height
- Made in the USA
VG6 Precision Gamma 5.56 Compensator (1/2×28)
Out of stock
$80.99The VG6 GAMMA 556 is a high-performance muzzle brake for eliminating recoil. It was designed using state of the art engineering techniques, utilizing CFD (Computational Fluid Dynamics) and CAE (Computer Aided Engineering). This product is 100% CNC machined for optimal performance.
- Material: 17-4ph Heat Treated Stainless Steel
- Finish: Black Nitride – Satin Finish(Half Gloss)
- Platform: AR-15
- Caliber: 5.56/.223
- Thread: 1/2×28 RH
- Includes crush washer
EOTech Vudu 1-6×28 FFP SR3 5.56mm BDC Reticle
In stock
$1,329.00This is an optic that feels at home on the AR platform or on a bolt action rifle. The EOTECH Speed Ring reticle allows for fast target engagement at low power, but at higher power provides the resolution and accuracy required to tackle longer shots. The Vudu 1-6X is the perfect solution for short- to medium-range applications.
- Reticle: SR-3
- First Focal Plane
- Overall Length: 10.63″ (270 mm)
- Weight: 20.1 oz (570 g)
- Magnification: 1-6X
- Tube Diameter: 30 mm
- Objective Diameter: 24 mm
- Power Source: CR2032
Lancer L5AWM – 10 Round Magazine for AR-15/M4
In stock
$18.53 – $21.11Lancer set out to design a better 5.56 magazine; one with the reliability of steel and the durability and weight of polymer. The L5 Advanced Warfighter Magazine (AWM®) is that magazine. The L5AWM’s exclusive hybrid design includes a hardened steel feed lip assembly molded into a proprietary polymer body with aggressive surface texturing to create the ultimate rifle magazine tough enough for military, law enforcement, and competition applications.
- Platform: Weapon systems that utilize 5.56 NATO magazines
- Caliber: 5.56×45 Nato and .223 Remington
- Material: Polymer Body/Steel Reinforced Feed Lips
- Capacity: 10
Spiritus Systems OTB Placard – 5.56 x .45
Out of stock
$64.95The LV Placard was designed to give users superior retention of magazines and other mission-critical equipment. The stretchy nature of elastic allows it to expand to accommodate large or oddly shaped pieces of equipment.
- Made of ideal materials for seaborne operations
- Form-fitting cells that can hold a variety of different items
- Fast-drying materials
- Superior retention of magazines
- Low profile minimalistic design
Spiritus Systems Placard 5.56 X .45
In stock
$59.95The LV Placard was designed to give users superior retention of magazines and other mission-critical equipment.
- Attach the included ITW Nexus hardware to turn your placard into a Nano-sized chest rig.
- The back of the placard is fully lined with a hard loop field for secure fitment to your plate carrier.
- The elastic creates form-fitting cells that can hold a variety of different items.
- Elastic allows it to expand to accommodate large or oddly shaped pieces of equipment.
- Features webbing at the base of the system instead of sewing it completely shut.
- Laminate loops on the outside of each cell to allow for the attachment of retention loops.
Spiritus Systems Bank Robber Chest Rig
In stock
$59.95The Bank Robber Chest Rig is a low-profile minimalist chest-worn load carriage system.
- The Chest Rig is constructed entirely out of elastic material.
- Conforms and retains oddly shaped items such as smoke grenades, flashbangs, magazines, and tourniquets.
- The Bank Robber comes standard with 4 Elastic cells and two retention bungees designed to hold tourniquets or other like items.
- A Back Strap is required for the chest rig to work properly.
- It is designed to work with either Spiritus’s Skinny Straps or Fat Straps setups.
Spiritus Systems Elastic HLT Cummerbund
In stock
$78.95 – $89.95The 5-Inch Elastic Cummerbund is a simple and effective solution for professionals who need to carry and have rapid access to additional ammunition and equipment on their sides while still maintaining a low profile.
- Elastic cells are 3 inches wide and are built around standard 5.56 Magazines, such as the PMAG.
- Elastic cummerbunds prevent user fatigue while worn for long durations.
- Materials sourced from industry leaders in textiles manufacturing.
- The cummerbund attaches inside the plate bag.
- The design creates a smooth profile when worn underneath clothing.
Spiritus Systems 5.56/.223 Rifle Magazine Insert – Triple
In stock
$24.95The 5.56 Rifle Triple Insert is an elastic custom insert that fits 3 magazines.
- Elastic is very quiet when removing or adding magazines.
- Quick and easy access to your magazines while providing excellent retention.
- Elastic will not deform due to heat over time.
- The magazine insert is retained by hard Hook/Loop sewn to both sides.
- Dimensions: 9″ x 4″
Spiritus Systems 5.56/.223 Rifle Magazine Insert – Single
Out of stock
$19.95The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one.
- Easy access to your magazines while providing excellent retention.
- Fits into either pocket on the Micro Fight Chassis MK 3.
- Quiet when removing or adding magazines.
Reptilia Corp AUS 34mm Optic Mount
In stock
$292.46Introducing the AUS Mount for 34mm diameter magnified optics, from Reptilia.
- Material: 7075-T6 aluminum
- Finish: Type III hardcoat anodized
- 34mm rings
- 1.54 inch height
- Made in the USA
Magpul MOE SL Carbine Stock (Mil-Spec) for AR15/M16
In stock
$61.70 – $63.35The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.
- Platform: AR-15, M4, M16, AR-10, LR-308, SR-25
- Compatibility: Mil-Spec extension tube (not included)
- Material: Polymer
- LOP, M4 Collapsed ~10.8 in.
- LOP, M4 Extended ~14.1 in.
- LOP Adjustment Range 3.3 in.
- Length, max 7.2 in.
- Weight 9.6 oz.