Brand
Plate Carriers
Spiritus Systems Back Panel Adapter XL
Out of stock
$27.95Instead of building multiple size back panels, Spiritus Systems was able to make back panels compatible with all plate bag sizes, including size XL thanks to the Back Panel adapter.
- The Back Panel XL Adapter zips in between your back panel and your rear plate bag giving you a perfect fit even with your XL plate bags
- The adapter can also be used with a Size Large Plate bag as well, if you feel that the panel is too tight with your loaded configuration
- Two zippers are included, one for each side. You can use just one, or both depending on how much of a load you have in the panel
Spiritus Systems Side Armor Bag Caps
In stock
$25.95 – $40.28LV Side Armor Bag Caps caps revolutionize the way users carry side armor. No longer does the end user need to have separate bags MOLLED onto their cummerbund to carry hard plates and soft armor at the same time.
- Combining both hard plate and soft armor bags into one item, we save material and space. This reduces the load on the user and helps in reducing bulk and heat
- Simply add a cap to our LV Side Armor Bags and you’re good to go
- LV Side Armor Caps are sold as a PAIR
- See size compatibility below
Spiritus Systems MOLLE Back Panel
In stock
$82.95The MOLLE back panel was designed to give LV/119 O V E R T users the ability to quickly swap out multiple rear bag loadout configurations based on the needs of a mission set. With its semi-rigid MOLLE frame, multiple anchor points, and quick zip installation, the MOLLE Back Panel is just as robust as a permanent sewn-in system while providing a near limitless set of pouch combination options.
- The MOLLE Back Panel features six columns of MOLLE across, and 12 slots down
- Provides ample real estate for attaching water bladders, wide pouches, or multiple small pouches side-by-side
- End users can now keep one plate carrier for all missions and simply swap out back panels that have been preloaded with specific equipment
- Swapping between MOLLE Back Panels takes less than a minute and requires no tools
- Allows operators to store additional back panels in vehicles or ready rooms for rapid deployment when needed
Spiritus Systems OTB Side Armor Bags
Out of stock
$74.95Spiritus Systems are proud to bring a suite of products that directly results in improved load carriage and soldier survival during sea borne operations. The OTB product line is built with a mesh material which allows for quick drainage of water and sea borne debris such a sand.
- The LV/ Side Armor Bags are modular in design and allow for the use of hard armor plates, soft armor inserts (with the addition of one of our Side Armor Bag Caps™), or both hard and soft armor at the same time
- The bags were built with an offset MOLLE configuration which allows the user to wear the plates as far forward on the cummerbund as possible. Wearing your side armor as far forward allows for side plate to front plate contact, and closes a small gap in protection left over by traditional side armor systems currently on the market. Side Armor Bags are compatible with MOLLE cummerbunds and will not work with elastic cummerbunds
- The OTB model of the LV/ Side Armor Bags are made with a mesh material, which allows for quick drainage of water and sea borne debris such a sand. They are also easily cleaned with fresh water after conducting operations in salt water
Spiritus Systems Assault Back Panel Core
In stock
$189.95The Assault Panel Core was designed to be a multi-mission back panel attachment to your LV-119 OVERT Rear Plate Bag. We designed the Panel to fill a spectrum of needs ranging from a light weight Assault Panel, to a more robust Pack Panel. The panel is both expandable and modular and can accommodate a plethora of equipment to meet almost any operational need.
Fitment Guide:
- Medium Overt Plate Bags – Fits
- Large Overt Plate Bags – Fits, could use an XL Adapter if you have very thick plates, and are overloading the panel
- Extra Large Overt Plate Bags – Needs an XL Adapter to be compatible with the XL Plate Bags
Spiritus Systems OTB Shoulder Cover – Trifold
Out of stock
$20.91The OTB TRI Fold shoulder cover is a simple solution for covering up your OTB LV/119 OVERT shoulder straps. Although these are not built with padding in mind, they do offer some comfort for extended wear. The TRI Fold design makes these easy to take on and off. It also makes routing communication wires easy and simple.
- Fast-drying materials
- Ideal for routing comms wire
- Offers additional padding for comfort
- Easy installation
- Sold as a pair
Spiritus Systems OTB LV-119 Rear Overt Plate Bag
In stock
$120.95The Over The Beach (OTB) OVERT shares the same profile as the COVERT and OVERT plate bags but with modifications that make it more suitable for seaborne operations.
- The rear bag also features minimal MOLLE webbing and Zippers for integrations with Spiritus Systems Zip-on panels only.
- The cummerbund attachment is a proprietary system that allows for the use of all Spirius Systems cummerbunds
- Full integration of the Recovery Handle™ sold separately
- Modular and low profile design
Spiritus Systems OTB LV-119 Front Overt Plate Bag
In stock
$120.95The Over The Beach (OTB) OVERT shares the same profile as the COVERT and OVERT plate bags but with modifications that make it more suitable for seaborne operations. Most noticeable the bags are made primarily of a hydrophobic mesh material.
- Fast drying materials suitable for seaborne operations
- Modular and low profile design
- Comes standard with a PTT/Porkchop Loop on either side.
- Shoulders facilitate commo cable routing inside the plate bags and over the shoulders.
London Bridge Trading G3 V2 Plate Carrier
Out of stock
$303.66 – $313.34The London Bridge Training LBT-6094 G3v2 is LBT’s latest lightweight modular plate carrier. It is derived from the original industry staple LBT-6094 plate carrier with updated materials and functionality.
- Lightweight rigid cummerbund
- Removable shoulder pads with routing slots for comms & hydration
- Front admin pocket
- Reinforced drag handle
- 4-way stretch back with mesh channel center
- Side plate pocket compatible (sold separately, LBT-2739Q)
- Foam air channel pad compatible (sold separately, LBT-6905A)
Spiritus Systems Side Armor Bags
In stock
$74.95The bags were built with an offset MOLLE configuration, which allows the user to wear the plates as far forward on the cummerbund as possible.
- The LV/ Side Armor Bags allow for the use of hard armor plates, soft armor inserts, or both hard and soft armor at the same time.
- Compatible with MOLLE cummerbunds and will not work with elastic cummerbunds.
- Built with stretch materials to accommodate 6 x 6-inch hard armor plates up to 1 inch thick in a stand-alone configuration.
- Offset MOLLE configuration allows the user to wear the plates as far forward on the cummerbund as possible.
Spiritus Systems Elastic HLT Cummerbund
In stock
$78.95 – $89.95The 5-Inch Elastic Cummerbund is a simple and effective solution for professionals who need to carry and have rapid access to additional ammunition and equipment on their sides while still maintaining a low profile.
- Elastic cells are 3 inches wide and are built around standard 5.56 Magazines, such as the PMAG.
- Elastic cummerbunds prevent user fatigue while worn for long durations.
- Materials sourced from industry leaders in textiles manufacturing.
- The cummerbund attaches inside the plate bag.
- The design creates a smooth profile when worn underneath clothing.
Spiritus Systems MOLLE HLT Cummerbund
In stock
$67.95 – $80.52The HLT MOLLE Cummerbund was designed to be a lightweight and simple load carriage solution for the LV/119 series of vests.
- Utilize any MOLLE accessory for an almost infinite amount of configurations for mission needs.
- Allow simultaneous use of the same MOLLE cell for products mounted on the inside and outside of the cummerbund.
- Materials sourced from industry leaders in textiles manufacturing.
- The cummerbund attaches inside the plate bag.
- The design creates a smooth profile when worn underneath clothing.
Spiritus Systems MOLLE TUBES Cummerbund
In stock
$94.95 – $113.92The TUBES™ MOLLE Cummerbund was designed to be a lightweight and simple load carriage solution for the LV/119 series of vests.
- Features the officially licensed First Spear TUBES™ Attachments systems.
- Utilize any MOLLE accessory for an almost infinite amount of configurations for mission needs.
- The TUBES™ is a great option for those who are in and out of their vest frequently and have experienced wear and tear on their Hook/Loop attachment vests.
- The cummerbund attaches inside the plate bag.
- The design creates a smooth profile when worn underneath clothing.
Spiritus Systems Shoulder Cover – Trifold
In stock
$19.95 – $21.20The TRI Fold shoulder cover is a simple solution for covering up your LV/119 shoulder straps.
- The TRI Fold design makes these easy to take on and off.
- Makes for an easy and simple solution to routing communication.
- The shoulder covers are sold as a pair.
Spiritus Systems Shoulder Cover – Low Profile
In stock
$19.50The Shoulder Cover is part of the LV119 Plate Carrier System.
- Designed to slide over your shoulder straps.
- Prevents snagging on clothing.
- Low vis profile.
- The shoulder covers are sold as a pair.
Spiritus Systems LV-119 Rear Covert Plate Bag
In stock
$79.95The LV-119 Rear Covert Plate Bag is part of the LV/119 SYSTEM.
- No external mounting that can get snagged or ripped off when exiting vehicles in haste.
- Creates a smooth profile when wearing underneath clothing.
- Designed to fit United States Standard Issue SAPI cut plates.
- Designed to be a scalable and highly configurable plate carrier platform.
- Medium-10″ x 12.5″
- Large- 10.25″ x 13.25″
- Thickness- MAXIMUM of 1.20″
Spiritus Systems LV-119 Rear Overt Plate Bag
In stock
$115.95The LV-119 Rear Overt Plate Bag is part of the LV/119 SYSTEM.
- Designed to fit United States Standard Issue SAPI cut plates.
- Features minimal MOLLE webbing and Zippers for integrations with Spirirus’s Zip-on panels.
- The OVERT shares the same profile as the COVERT plate bags but with modifications that make them more suitable for high-profile operations.
- Medium -10″ x 12.5″
- Large – 10.25″ x 13.25″
- Thickness – MAXIMUM of 1.20″
Spiritus Systems LV-119 Front Overt Plate Bag
In stock
$115.95The LV-119 Front Overt Plate Bag is part of the LV/119 SYSTEM.
- Designed to fit United States Standard Issue SAPI cut plates.
- Plate Bags offer placard and chest rig integration via removable 1 Inch ITW NEXUS Buckles.
- The OVERT shares the same profile as the COVERT plate bags but with modifications that make them more suitable for high-profile operations.
- Removable clips allow users to reduce the signature of the plate bag.
- Medium Dimensions: 10″ x 12.5″
- Large Dimensions: 10.25″ x 13.25″
- Thickness Dimensions: MAXIMUM of 1.20″
Grey Ghost Gear SMC Plate Carrier
Out of stock
$298.99The SMC Plate Carrier is Grey Ghost Gear’s most advanced carrier design to date. Secretly in development for the past 2 years, the SMC (Shoot, Move, Communicate) is everything you want in a lightweight, combat-ready plate carrier.
- Weighs 1.5 lbs (without plates)
- MOLLE/PALS style webbing for the addition of pouches.
- Designed to carry a pair of 10×12 hard plates or most large SAPI plates.
- The front panel features an open pocket.
- “One size fits most” with adjustable shoulder pads.
Eagle Industries Active Shooter Response Plate Carrier
Out of stock
$164.99The Eagle Industries Active Shooter Response Plate Carrier is a minimalist profile plate carrier designed for maximum mobility. Constructed of MIL-SPEC 500 denier nylon and Tweave 520E, the plate carrier features lightweight HANK shoulder straps with cut-outs for comfort and ventilation. The shoulder straps include etended hook and loop closure with Tweave 520E sleeves for a secure fit.
- Lightweight HANK shoulder straps with cut-outs for comfort and ventilation.
- Shoulder straps include extended hook and loop closure with Tweave 520E sleeves for secure fit.
- Loop on front and back for unit identifier, flag, patches, etc..
- Removable 1-1/2″ elastic cummerbund with quick attach side release buckles for ease of donning and doffing.
- Compatible with all Eagle Removable Front Flaps.
- Push-to-talk (PTT) attachments at shoulder base.
- Tweave 520e 4-way stretch material on interior accommodates multiple plate thicknesses.
Raine Inc Bridger MOLLE Panel for FirstSpear Tubes
Out of stock
$59.99- Adds back the MOLLE/PALS real-estate lost from using FirstSpear® Tubes™ (Bridges the Gap)
- Smooth quick release function
- Covers and protects FirstSpear® Tubes™ quick release hardware
- Increases service life of Tubes™ quick release hardware
- Increased protection from accidental opening of Tubes™ quick release hardware
- Attachment options compatible with MOLLE/PALS, 6/12™, and 6/9™ platforms
- Ambidextrous, works with left and right FirstSpear® Tubes™ cummerbunds
- Quick release pull cord extender for ease of donning & doffing with mounted dual stacked ammo and radio pouches