Shop

Spiritus Systems Back Panel GP Flap

In stock

$87.95

The GP Flap is a single pocket zip on attachment to the Assault Back Panel Core.

  • Consists of one pocket that measures 10″ x 6″ x 2.5″
  • Pocket was built to store extra items that may be needed on an operation such as medical equipment or roll up flex linear charges
  • The pocket features a half zippered closure to prevent items from inadvertently dumping out unzipping the pouch
  • Inside the pocket there is Hook/Loop lined on both sides for the addition of Hook/Loop accessories.
  • Two tie down locations on the interior for securing sensitive items
  • The GP Flap has two built-in channels behind the pocket that allows for the storage of linear items, such as Slap Charges and Breach Pens
  • The front of the pocket offers a smaller zippered stash pocket for organizing smaller items
  • It features a Hook/Loop field that measures 2″ x 9″ for attaching placards or patches
  • The GP flap is attached to the Assault Back Panel Core by a separating dual zipper, 3 directional snaps and a hook/loop field.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Side Armor Bag Caps

In stock

$27.27$41.17

LV Side Armor Bag Caps caps revolutionize the way users carry side armor. No longer does the end user need to have separate bags MOLLED onto their cummerbund to carry hard plates and soft armor at the same time.

  • Combining both hard plate and soft armor bags into one item, we save material and space. This reduces the load on the user and helps in reducing bulk and heat
  • Simply add a cap to our LV Side Armor Bags and you’re good to go
  • LV Side Armor Caps are sold as a PAIR
  • See size compatibility below
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems MOLLE Back Panel

In stock

$82.95

The MOLLE back panel was designed to give LV/119 O V E R T users the ability to quickly swap out multiple rear bag loadout configurations based on the needs of a mission set. With its semi-rigid MOLLE frame, multiple anchor points, and quick zip installation, the MOLLE Back Panel is just as robust as a permanent sewn-in system while providing a near limitless set of pouch combination options.

  • The MOLLE Back Panel features six columns of MOLLE across, and 12 slots down
  • Provides ample real estate for attaching water bladders, wide pouches, or multiple small pouches side-by-side
  • End users can now keep one plate carrier for all missions and simply swap out back panels that have been preloaded with specific equipment
  • Swapping between MOLLE Back Panels takes less than a minute and requires no tools
  • Allows operators to store additional back panels in vehicles or ready rooms for rapid deployment when needed
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Back Panel Flashbang Flap

In stock

Add to cart to see price

The Flash Bang Flap is a two pocketed zip on attachment that mates to the Assault Back Panel Core.

  • Measurements: 5″ x 4″ x 1.5″
  • Pockets were built to house common Flash Bang sizes
  • Removable flap (included) and a built-in channel behind the pocket that allows for the storage of linear items
  • Pockets can accommodate one of our Dividers, which will keep your flash bangs separate and upright
  • The Flash Bang flap is attached to the Assault Back Panel Core by a separating dual zipper, 3 directional snaps and a hook/loop field
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Assault Back Panel Core

In stock

$189.95

The Assault Panel Core was designed to be a multi-mission back panel attachment to your LV-119 OVERT Rear Plate Bag. We designed the Panel to fill a spectrum of needs ranging from a light weight Assault Panel, to a more robust Pack Panel. The panel is both expandable and modular and can accommodate a plethora of equipment to meet almost any operational need.

Fitment Guide:

  • Medium Overt Plate Bags – Fits
  • Large Overt Plate Bags – Fits, could use an XL Adapter if you have very thick plates, and are overloading the panel
  • Extra Large Overt Plate Bags – Needs an XL Adapter to be compatible with the XL Plate Bags
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Placard 5.56 X .45

In stock

$59.95

The LV Placard was designed to give users superior retention of magazines and other mission-critical equipment.

  • Attach the included ITW Nexus hardware to turn your placard into a Nano-sized chest rig.
  • The back of the placard is fully lined with a  hard loop field for secure fitment to your plate carrier.
  • The elastic creates form-fitting cells that can hold a variety of different items.
  • Elastic allows it to expand to accommodate large or oddly shaped pieces of equipment.
  • Features webbing at the base of the system instead of sewing it completely shut.
  • Laminate loops on the outside of each cell to allow for the attachment of retention loops.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Small GP Pouch

In stock

$55.80$58.73

There are plenty of GP pouches out there on the market, but this one is more than your average General Purpose pouch.

  • The Small GP Pouch features a front pocket for storing items like VS-17 panels or SSE bags.
  • The pouch is built with extra depth to allow for the storage of Night Vision Goggles.
  • Constructed out of high-quality 500d Cordura nylon.
  • The inside of the pouch is lined with loop and accepts Spiritus’s Pouch Insert Suite.
  • Dimensions (Approximate) Height 5.5″ x Width 5.5″ x Depth 3″.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Fanny SACK Pouch Mk3

In stock

$64.95$65.00

The “Fanny SACK” bridges the gap between Spiritus’s popular Sub Abdominal Carry Kit and every day carry.

  • Designed to be worn around your waist.
  • Wear it for a full mission profile, or stash your carry gun in it while you’re out on the longboard.
  • Easy to access from both sides or when in a confined space like a vehicle.
  • Features a half-zip design to secure your equipment even if the zipper is left open.
  • Each side has a webbing loop for attaching equipment such as gloves, carabiners, or chem lights.
  • The inside features soft loop field on both sides.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Elastic HLT Cummerbund

In stock

Add to cart to see price

The 5-Inch Elastic Cummerbund is a simple and effective solution for professionals who need to carry and have rapid access to additional ammunition and equipment on their sides while still maintaining a low profile.

  • Elastic cells are 3 inches wide and are built around standard 5.56 Magazines, such as the PMAG.
  • Elastic cummerbunds prevent user fatigue while worn for long durations.
  • Materials sourced from industry leaders in textiles manufacturing.
  • The cummerbund attaches inside the plate bag.
  • The design creates a smooth profile when worn underneath clothing.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems MOLLE HLT Cummerbund

In stock

Add to cart to see price

The HLT MOLLE Cummerbund was designed to be a lightweight and simple load carriage solution for the LV/119 series of vests.

  • Utilize any MOLLE accessory for an almost infinite amount of configurations for mission needs.
  • Allow simultaneous use of the same MOLLE cell for products mounted on the inside and outside of the cummerbund.
  • Materials sourced from industry leaders in textiles manufacturing.
  • The cummerbund attaches inside the plate bag.
  • The design creates a smooth profile when worn underneath clothing.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems MOLLE TUBES Cummerbund

In stock

Add to cart to see price

The TUBES™ MOLLE Cummerbund was designed to be a lightweight and simple load carriage solution for the LV/119 series of vests.

  • Features the officially licensed First Spear TUBES™ Attachments systems.
  • Utilize any MOLLE accessory for an almost infinite amount of configurations for mission needs.
  • The TUBES™ is a great option for those who are in and out of their vest frequently and have experienced wear and tear on their Hook/Loop attachment vests.
  • The cummerbund attaches inside the plate bag.
  • The design creates a smooth profile when worn underneath clothing.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Shoulder Cover – Trifold

In stock

$6.99$22.15

The TRI Fold shoulder cover is a simple solution for covering up your LV/119 shoulder straps.

  • The TRI Fold design makes these easy to take on and off.
  • Makes for an easy and simple solution to routing communication.
  • The shoulder covers are sold as a pair.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Shoulder Cover – Low Profile

In stock

$5.99$19.59

The Shoulder Cover is part of the LV119 Plate Carrier System.

  • Designed to slide over your shoulder straps.
  • Prevents snagging on clothing.
  • Low vis profile.
  • The shoulder covers are sold as a pair.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems LV-119 Rear Covert Plate Bag

In stock

Add to cart to see price

The LV-119 Rear Covert Plate Bag is part of the LV/119 SYSTEM.

  • No external mounting that can get snagged or ripped off when exiting vehicles in haste.
  • Creates a smooth profile when wearing underneath clothing.
  • Designed to fit United States Standard Issue SAPI cut plates.
  • Designed to be a scalable and highly configurable plate carrier platform.
  • Medium-10″ x 12.5″
  • Large- 10.25″ x 13.25″
  • Thickness- MAXIMUM of 1.20″
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems LV-119 Rear Overt Plate Bag

In stock

Add to cart to see price

The LV-119 Rear Overt Plate Bag is part of the LV/119 SYSTEM.

  • Designed to fit United States Standard Issue SAPI cut plates.
  • Features minimal MOLLE webbing and Zippers for integrations with Spirirus’s Zip-on panels.
  • The OVERT shares the same profile as the COVERT plate bags but with modifications that make them more suitable for high-profile operations.
  • Medium -10″ x 12.5″
  • Large – 10.25″ x 13.25″
  • Thickness – MAXIMUM of 1.20″
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Fat Strap – Mk4

Out of stock

$49.95

The Fat Strap MK4 is a universal H-harness solution designed to work with the Micro Fight Chassis, 34 A Split Chest Rig, and Thing 2 expansion chassis.

  • Reduced profile design now includes an updated Squadron overlay panel with more horizontal mounting points for PTTs and other equipment.
  • Features shock cord holes for mounting other kit.
  • Loop field patch on the back completes the Straps for placement of name tapes or IR Markers.
  • You do NOT need to order two to complete your Micro Fight Chest Rig.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Micro Fight Half Flap – Mk2

Out of stock

Add to cart to see price

The Half Flap Mk2 allows for expanded carrying options while utilizing one of Spiritus’s Pistol Magazine Inserts in the front pocket of the Micro Fight Chassis.

  • Now constructed out of a durable Squadron laminate.
  • Features a full-width pull tab that allows for quick access to the flap.
  • Easy to insert to chassis.
  • This product will work on the Micro Fight Chest Rig MK2, MK3, MK4, and MkV. (NOT compatible with the MK1)
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Pangolin Flap – 3 Pack

Out of stock

Add to cart to see price

The Pangolin Flap is a multi-purpose pouch closure that can be used in conjunction with the SPUD Pouch, Micro Fight Chassis, or other 3rd party products. They will attach to any pouch or magazine holder with a loop field on the front.

  • The flap features a multi-directional laser-cut scrim pattern that allows it to wrap and form around irregular objects when pulled tight
  • Reduces equipment slop when secured in the pouch
  • Pangolin Flaps can be run in groups in the Micro Fight Chest Rig System by securing them between the elastic magazine inserts, and the chassis
  • Includes: 3 Pangolin Flaps
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems SPUD Pouch

Out of stock

$59.95

The SPUD pouch is built hold pretty much anything. Spiritus Systems has taken the traditional, open-top, general-purpose pouch and thoroughly re-worked it to give it a big bump in versatility.

  • The rim of the pouch is lined with an adjustable shock cord loop to keep the contents secure and slip free even if they are significantly smaller than the pouch itself
  • The top of the pouch features both hook & loop and pull tabs so you can choose between the included scrim cover or an adjustable shock cord flap
  • Both options are included with every SPUD pouch. The scrim cover, when pulled tight will wrap around any irregular shapes and keep the user’s kit fully locked into the pouch while still maintaining full coverage
  • The whole system takes up two columns of MOLLE and can be mounted pretty much anywhere
  • It will hold anything from a single 556 magazine, all the way up to two 7.62 magazines (and a wide variety of different items as well)
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems 34 Alpha Chest Rig

Out of stock

$134.95

The 34 Alpha Chest Rig is a split chassis that will interface directly with the existing Spiritus Systems straps and pouches. This is a true blank-slate platform that enables load-carriage configuration options for weapon ammo of nearly any caliber, and when combined with the Spiritus Systems current Pouch Suite, the end user’s options are near-limitless.

  • The system can be paired with a set of Spiritus Systems Fat Straps and Back Strap to create a complete platform for a wide range of load bearing configurations
  • The panels are built with Squadron MOLLE front faces and elastic cells on the back for extra storage
  • The bottom of each 34 Alpha Panel also has a hook & loop slot to mount hanger pouches
  • The chest rig panels are connected via two sliding Fastex buckles that provide a secure connection point
  • One-handed, opening and closing when engaging in activities that may require an open front configuration (i.e. going into the prone)
  • They also allow for micro adjustments at the front without having to modify the width of the back strap
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems GP Pouch Padded Insert

Out of stock

$29.46

The Spiritus Systems Padded foam insert can be used to pad the interior of a Small or Medium GP against shock. The insert features a Velcro hook field that engages with the interior Velcro of the GP pouches.

  • The flaps of the padded insert collapse to form a protective box that will accommodate night vision binoculars or other sensitive items. Once fully installed, the insert does not cover the 6th (interior) side of the pouch. This is to maximize internal storage capacity. The design relies on the torso of the wearer to provide the 6th wall of protection for the item
  • The outer surface of the foam pad is backed with loop Velcro and will accept any hook Velcro accessory attachments so small items like batteries or tools can be affixed and located quickly and easily
  • This insert is designed to work with our Small and Medium GP pouch, Spiritus Systems does not guarantee compatibility with any other pouches

Spiritus Systems Back Panel Adapter XL

Out of stock

$27.95

Instead of building multiple size back panels, Spiritus Systems was able to make back panels compatible with all plate bag sizes, including size XL thanks to the Back Panel adapter.

  • The Back Panel XL Adapter zips in between your back panel and your rear plate bag giving you a perfect fit even with your XL plate bags
  • The adapter can also be used with a Size Large Plate bag as well, if you feel that the panel is too tight with your loaded configuration
  • Two zippers are included, one for each side. You can use just one, or both depending on how much of a load you have in the panel
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Divider Pouch Insert

Out of stock

$19.59

The Spiritus Systems Pouch Insert Suite is designed to optimize your equipment through organization and increase performance by improving function. The inserts were designed to be modular, allowing you to mix and match them to your specific needs.

  • The Divider Pouch Insert is a simple yet effective design that allows you to carry an array of different equipment in a secure and organized fashion
  • Allows you to “split” your pouch into different compartments allowing you to store items separately in the same pouch
  • It also has 4 elastic loops that allow you to securely attach items like Chem lights, Sharpies or DARTs
  • Utilizes a larger footprint in order to give the insert stability and keep it in place even in the most non-permissive environments
  • Simply attach the Hard Hook/Loop Insert into your pouch
  • The Divider Insert has four points of Hook/Loop attachment and a rigid center for keeping your items separate

Spiritus Systems 3 Loop Pouch Insert

Out of stock

$17.88

The Spiritus Systems Pouch Insert Suite is designed to optimize your equipment through organization and increase performance by improving function. The inserts were designed to be modular, allowing you to mix and match them to your specific needs. The 3 Loop Pouch Insert is a simple yet effective design that allows you to carry an array of equipment in a secure and organized fashion.

  • Designed to be paired with the 4 Loop Pouch Insert to completely organize your equipment
  • Utilizes a larger footprint in order to give the insert stability and keep it in place even in the most non-permissive environments.
  • This insert features three elastic loops that are capable of holding 40mm grenades, medical equipment or miscellaneous items.
  • Compatible with all Spiritus Systems Pouches.

Spiritus Systems 4 Loop Pouch Insert

Out of stock

$17.88

The Spiritus Systems Pouch Insert Suite is designed to optimize your equipment through organization and increase performance by improving function. The inserts were designed to be modular, allowing you to mix and match them to your specific needs. The 4 Loop Pouch Insert is a simple yet effective design that allows you to carry an array of equipment in a secure and organized fashion.

  • Designed to be paired with the 3 Loop Pouch Insert to completely organize your equipment
  • Utilizes a larger footprint in order to give the insert stability and keep it in place even in the most non-permissive environments
  • This insert features four elastic loops that are capable of holding 40mm grenades, medical equipment or miscellaneous items
  • Compatible with all Spiritus Systems Pouches

Spiritus Systems Wontons

Out of stock

$23.95$37.95

The WONTON is the first product that Spiritus Systems has developed under “Vehicle/Mobility” product segment.

  • Mobility and organization is key to successful planning and execution of both Tactical Military Operations as well as adventuring
  • The Wontons were developed specifically to organize all of your things
  • Available in three sizes
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Chemlight / AA Battery Pouch Insert

Out of stock

$17.88

The Spiritus Systems Pouch Insert Suite is designed to optimize your equipment through organization and increase performance by improving function. The inserts were designed to be modular, allowing you to mix and match them to your specific needs.

  • The ChemLight/AA Battery Pouch Insert is a simple yet effective design that allows you to carry ChemLights or AA batteries in a secure and organized manner
  • Utilizes a larger footprint in order to give the insert stability and keep it in place even in the most non-permissive environments
  • Simply attach the Hard Hook/Loop Insert into your pouch or onto your Soft Loop lined accessory
  • Holds six ChemLights or six AA batteries
  • Compatible with all Spiritus Systems Pouches
  • Available in Jet Black

Spiritus Systems Hook

Out of stock

$26.41

A simple method of attaching items securely where you want them. Easily stow your gloves when not in use or use it to feed chem light bundles on your next objective. The Hook is designed to be utilized on the back side of your micro fight, or underneath the flap or placard of a plate carrier.

  • Velcro surface area measures 3×4 Inches
  • One side is Hook the other is Loop
  • Available in Jet Black only

Spiritus Systems OTB Side Armor Bags

Out of stock

$74.95

Spiritus Systems are proud to bring a suite of products that directly results in improved load carriage and soldier survival during sea borne operations. The OTB product line is built with a mesh material which allows for quick drainage of water and sea borne debris such a sand.

  • The LV/ Side Armor Bags are modular in design and allow for the use of hard armor plates, soft armor inserts (with the addition of one of our Side Armor Bag Caps™), or both hard and soft armor at the same time
  • The bags were built with an offset MOLLE configuration which allows the user to wear the plates as far forward on the cummerbund as possible. Wearing your side armor as far forward allows for side plate to front plate contact, and closes a small gap in protection left over by traditional side armor systems currently on the market. Side Armor Bags are compatible with MOLLE cummerbunds and will not work with elastic cummerbunds
  • The OTB model of the LV/ Side Armor Bags are made with a mesh material, which allows for quick drainage of water and sea borne debris such a sand. They are also easily cleaned with fresh water after conducting operations in salt water
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Expander Wing Mk 2

Out of stock

$39.95

The Expander Wing Mk 2 was built as direct replacement for the original Spiritus Systems Micro Fight Expander Wing Set with a focus on enhancing the product’s functionality for plate carriers. The wing attaches to a Micro Fight Chassis or 556 Placard with a hook & loop flap and can be mounted for increased storage capacity on a chest rig or under the cummerbunds of a LV/119.

  • Can hold up to a variety of different sized radios
  • Will hold most small & medium caliber rifle magazines
  • Can integrate with First Spear tubes and Verco cummerbunds
  • The wing attaches to a Micro Fight Chassis or Placard with a hook/loop flap
  • The Expander Wing Mk 2 is completely reversible, and can be used on either the right or left side.
Select options This product has multiple variants. The options may be chosen on the product page

Spiritus Systems Shotgun / 123CR Battery Pouch

Out of stock

$17.88

The Spiritus Systems Pouch Insert Suite is designed to optimize your equipment through organization and increase performance by improving function. The inserts were designed to be modular, allowing you to mix and match them to your specific needs.

  • The Shotgun/123A Battery Pouch Insert is a simple yet effective design that allows you to carry Shotgun Shells or 123A batteries in a secure and organized fashion.
  • Utilizes a larger footprint in order to give the insert stability and keep it in place even in the most non-permissive environments.
  • While most hook & loop placards on the market today are flimsy and unreliable, these inserts are designed to stay in place exactly where you attach it.
  • Simply attach the hook field Hard Loop Insert into your pouch or onto your Soft Loop lined accessory.
  • Holds Six shotgun shells or Six 123A batteries.
  • Compatible with all Spiritus Systems Pouches.

Spiritus Systems Auto Bag

Out of stock

$226.96

The Spiritus Systems Auto Bag was developed in collaboration with Superior Defense as a versatile and portable storage solution for compact carbines, submachine guns and ancillary equipment. The bag is constructed with 1000D Cordura Nylon and is fully padded to keep your kit protected during transport.

  • Nylon webbing carry straps with hook and loop sleeve
  • Fully padded exterior
  • Full-length padded zipper tongue
  • Full-length removable padded bag divider
  • 6x modular hook & loop stowage straps
  • Oversized #10 YKK zipper
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page