Coyote Brown

With a straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.

• This pouch is made for STANAG magazines: AR15/M4 style magazines
• It features 5x Elastic loops to fit five 12 gauge shotgun shells
• AK magazines will NOT fit in this pouch
• Kydex wedge insert (KYWI) provides retention
• Pouch is 4.25″ tall
• Requires mounting hardware

With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.

• This pouch is made for STANAG magazines: AR15/M4 style magazines
• AK magazines will NOT fit in this pouch
• Kydex wedge insert (KYWI) provides retention
• Hybrid kydex and nylon design
• Pouch is 3.5″ tall
• Requires mounting hardware

With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.

• Fits 1 M4 style magazine and 2 double stack pistol magazines ( Retention may vary for single stack magazines )
• AK magazines will NOT fit in this pouch
• Hybrid Kydex and nylon design
• Kydex wedge insert (KYWI) provides retention
• Requires mounting hardware

The Expander Wing Mk 2 was built as direct replacement for the original Spiritus Systems Micro Fight Expander Wing Set with a focus on enhancing the product’s functionality for plate carriers. The wing attaches to a Micro Fight Chassis or 556 Placard with a hook & loop flap and can be mounted for increased storage capacity on a chest rig or under the cummerbunds of a LV/119.

• Can hold up to a variety of different sized radios
• Will hold most small & medium caliber rifle magazines
• Can integrate with First Spear tubes and Verco cummerbunds
• The wing attaches to a Micro Fight Chassis or Placard with a hook/loop flap
• The Expander Wing Mk 2 is completely reversible, and can be used on either the right or left side.

The SPUD pouch is built hold pretty much anything. Spiritus Systems has taken the traditional, open-top, general-purpose pouch and thoroughly re-worked it to give it a big bump in versatility.

• The rim of the pouch is lined with an adjustable shock cord loop to keep the contents secure and slip free even if they are significantly smaller than the pouch itself
• The top of the pouch features both hook & loop and pull tabs so you can choose between the included scrim cover or an adjustable shock cord flap
• Both options are included with every SPUD pouch. The scrim cover, when pulled tight will wrap around any irregular shapes and keep the user’s kit fully locked into the pouch while still maintaining full coverage
• The whole system takes up two columns of MOLLE and can be mounted pretty much anywhere
• It will hold anything from a single 556 magazine, all the way up to two 7.62 magazines (and a wide variety of different items as well)

The LV Placard was designed to give users superior retention of magazines and other mission-critical equipment.

• Attach the included ITW Nexus hardware to turn your placard into a Nano-sized chest rig.
• The back of the placard is fully lined with a  hard loop field for secure fitment to your plate carrier.
• The elastic creates form-fitting cells that can hold a variety of different items.
• Elastic allows it to expand to accommodate large or oddly shaped pieces of equipment.
• Features webbing at the base of the system instead of sewing it completely shut.
• Laminate loops on the outside of each cell to allow for the attachment of retention loops.

The bags were built with an offset MOLLE configuration, which allows the user to wear the plates as far forward on the cummerbund as possible.

• The LV/ Side Armor Bags allow for the use of hard armor plates, soft armor inserts, or both hard and soft armor at the same time.
• Compatible with MOLLE cummerbunds and will not work with elastic cummerbunds.
• Built with stretch materials to accommodate 6 x 6-inch hard armor plates up to 1 inch thick in a stand-alone configuration.
• Offset MOLLE configuration allows the user to wear the plates as far forward on the cummerbund as possible.

The “Fanny SACK” bridges the gap between Spiritus’s popular Sub Abdominal Carry Kit and every day carry.

• Designed to be worn around your waist.
• Wear it for a full mission profile, or stash your carry gun in it while you’re out on the longboard.
• Easy to access from both sides or when in a confined space like a vehicle.
• Features a half-zip design to secure your equipment even if the zipper is left open.
• Each side has a webbing loop for attaching equipment such as gloves, carabiners, or chem lights.
• The inside features soft loop field on both sides.

The MOLLE back panel was designed to give LV/119 O V E R T users the ability to quickly swap out multiple rear bag loadout configurations based on the needs of a mission set. With its semi-rigid MOLLE frame, multiple anchor points, and quick zip installation, the MOLLE Back Panel is just as robust as a permanent sewn-in system while providing a near limitless set of pouch combination options.

• The MOLLE Back Panel features six columns of MOLLE across, and 12 slots down
• Provides ample real estate for attaching water bladders, wide pouches, or multiple small pouches side-by-side
• End users can now keep one plate carrier for all missions and simply swap out back panels that have been preloaded with specific equipment
• Swapping between MOLLE Back Panels takes less than a minute and requires no tools
• Allows operators to store additional back panels in vehicles or ready rooms for rapid deployment when needed

The LV-119 Front Overt Plate Bag is part of the LV/119 SYSTEM.

• Designed to fit United States Standard Issue SAPI cut plates.
• Plate Bags offer placard and chest rig integration via removable 1 Inch ITW NEXUS Buckles.
• The OVERT shares the same profile as the COVERT plate bags but with modifications that make them more suitable for high-profile operations.
• Removable clips allow users to reduce the signature of the plate bag.
• Medium Dimensions: 10″ x 12.5″
• Large Dimensions: 10.25″ x 13.25″
• Thickness Dimensions: MAXIMUM of 1.20″

B5 Systems Collapsable Precision Stock gives the shooter full mobility by making the stock’s cheek riser and butt-pad adjustable.

• 2 QD sling slots.
• 2 M-LOK slots.
• Locking adjustment lever.
• Internal tensioners to remove rattle.
• Sturdy polymer construction.
• For AR-10 build.
• Weight: 25.65 oz.

The most natural grip for taking a squared-off stance. Your hand will naturally find its optimal position on the B5 Systems Type 23 P-Grip, thanks to its steep angle, extended tang, and palm-filling design. By ensuring proper trigger finger placement, this grip has been shown to improve shooting speed while correcting for any tendency to drift into a “chicken-wing” arm placement.

• Most up to date design featuring all-new aggressive texturing
• Constructed of durable composite
• Drop-in upgrade
• Weighs 2.40 Ounces

The Modular Holster Adapter Leg Strap Kit attaches directly onto the True North Concepts MHA, and for the first time in the history of holsters allows the shooter to choose the height where the leg strap sits. By attaching the specialty leg strap bracket onto the MHA, the leg strap will sit below the MHA, flush with the bottom of the MHA, or lightly above. For the first time, the shooter can choose the best position for their body size and comfort, custom tailoring their setup to their individual needs.

• High Strength Polymer Multi-positional attachment Bracket
• Adjustable 36″ long mil-w-5664 type 2 class 1 nylon and elastic webbing strap
• Color-matched bracket, ITW Fastex buckle, and Triglide
• Milspec Components & Berry Compliant sewn, 100% Made in America
• 1.9 oz overall weight
• Leg Strap bracket cross-compatibility with other popular straps
• Modular Holster Adapter available here.