Tape Switches
HRF Concepts WEDGE for Modlite Modbutton
Out of stock
$10.45The WEDGE (Weapon Electronics Dividing Gap Eraser) is the minimalist solution to button differentiation. Installs between two standard ModButton Lite switches and weighs a fraction of a gram.
- Material: Nylon Polymer
- Weight: 0.02oz (0.5g)
- Instructions: Available Here
- Color: Black
- Made in the USA
- Length: 0.16″ (4mm)
- Width: 1.15″ (29mm)
- Height: 0.65″ (17mm)
- Height Above Button Surface: 0.15″ (4mm)
Unity Tactical AXON M-LOK Mounting Kit
In stock
$16.00 – $17.26The AXON™ M-LOK® Mounting Kit increases functionality of the AXON™ remote switch by expanding the mounting capabilities to the M-LOK® rail. It replaces the rail grabbers with a frame that provides a low-profile attachment to any M-LOK® rail surface.
- Compatibility: AXON™
- Mounting System: M-LOK®
- Dimensions: IN: 1.16 X 2.70 X 0.96 (CM: 2.95 X 6.86 X 2.44)
- Weight OZ: 0.20 (G: 5.70)
- Material: High-Impact Polymer
Unity Tactical AXON – Crane Laser
In stock
$140.00 – $159.00The pinnacle of remote switch design for weapon-mounted accessories, AXON™ provides complete control of lights and lasers in a single, compact and rugged housing.
- SureFire® & NATO Crane-Spec Port compatible.
- Dimensions: IN: 1.16 X 2.70 X 0.96 (CM: 2.95 X 6.86 X 2.44)
- Weight: OZ: 1.6 (G: 45.5)
- Material: High-Impact Polymer.
- Cable Length: 7″
HRF Concepts Dual RAMP
In stock
$45.00 – $51.00The Dual RAMP (Remote Angled Modbutton Platform) is an ergonomic mounting solution for two Modlite ModButton Lite switches* and is compatible with the Light and Laser plug models.
- Material: Nylon Polymer
- Weight: 0.71oz (20g)
- Cable Side: Right or Left
- Included Hardware: Rail Grabber Nut (4)
- Instructions: Available Here
- Made in the USA
The Dual RAMP does not include ModButton Lites and requires two to function, grab them here.
Unity Tactical TAPS NGAL – Dual Pressure Switch
Out of stock
$272.00TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one-point command and control system for weapon-mounted electronics.
- NGAL model is only compatible with Surefire-type tail caps and the L-3Harris NGAL Laser.
- Features a proprietary visible laser override.
- Provides low-profile, dual-device control for lights and lasers.
- TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the operator’s choosing.
- Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package.
Modlite Systems Modbutton Lite – Dual Lead Plug
In stock
$149.00ModButton Lite is a smaller, lighter-weight cousin to the original ModButton. The Dual Lead variant is Modlite’s same Modbutton Lite, but has both a Surefire®/Modlite and Crane Laser lead.
- Made in the USA
- Weight: 1.8oz
- Dimensions: 1.0 × 3.8 × 5.7 in
- Mounting Side: Left or Right
- Color: Black or Tan
HRF Concepts RAMP Remote Angled Modbutton Platform
Out of stock
$26.94 – $30.91The RAMP (Remote Angled Modbutton Platform) is an ergonomic mounting solution for the Modlite ModButton Lite switch* and is compatible with the Light and Laser plug models.
- Material: Nylon Polymer.
- Weight: 0.46oz (13g).
- Cable Side: Right or Left.
- Included Hardware: Rail Grabber Nut (2).
- Color: Black and FDE.
- Made in the USA.
Cloud Defensive LCSMK1A + SureFire ST07 Tape Switch Bundle
Out of stock
$99.99 – $125.00If you prefer a SureFire weapon light, the LCS/ST-07 is an excellent option. This gives you the ability to hard-mount your ST-07 to your weapon with the Cloud Defensive Light Control System. Available with or without the UE socketed tailcap.
- Designed for the Surefire® ST07 Remote Tape Switch for Weapon lights, the same tape switch that is often supplied with the Surefire Scout series.
- The ST07 Tape Switch fits: SureFire Weapon Lights with socketed tail cap assemblies, including Millennium Universal, Classic Universal, Scout Light fitted with socketed tail cap, X300 and X400 with XT tail cap assembly.
- A full-length aluminum base allows for optimum tape switch engagement. No “give” in the tape switch when depressed makes for easier and more positive light engagement.
- Made in the USA
SureFire UE07 Remote Tape Switch and Tailcap for Weaponlights
In stock
$86.00The UE07 provides reliable remote activation for any Scout Light WeaponLight. Tailcap module screws onto Scout Light body. Switch, cable, and connector are an integral unit that plugs into the tailcap socket. A pressure-activated switch attaches to a firearm via adhesive-backed Velcro® pad. The UE07 also features a 7-inch cable that fits most rifle/carbine applications. The entire unit is O-ring sealed at both ends for superior weatherproofing.
- Reliable remote switch for any Scout Light
- Integral switch/cable/connector plugs into tailcap socket
- 7-inch cable fits most rifle and carbine applications
- Tape switch attaches with adhesive-backed Velcro®
- O-ring sealed, weatherproof
- Fits SureFire Scout Light WeaponLights
Unity Tactical TAPS SYNC – Dual Pressure Switch
In stock
$137.80 – $164.00TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS mounts directly to any industry standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third party rail adapters are needed, keeping the weapon lighter and sleeker. It features two on-board buttons and two accessory leads.
Available in 4 button configurations, TAPS SYNC utilizes a patented double pole dome switch to fire both devices simultaneously on isolated circuits to protect your devices.
Unity Tactical Hot Button – Rail Mount
In stock
$69.95 – $232.96Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore-ends, Hot Button has successfully reinvented how you interface with your lights and lasers.
- 45-degree angled button for an exponentially more comfortable press.
- Raised, crenelated bezel protects the button from accidental actuation.
- Overall footprint is much smaller than factory OEM pressure pads.
- Available for standard Surefire tail caps and standard Crane-Style laser ports.
- Hot Buttons come standard with 7″ cables.
Unity Tactical TAPS Dual Pressure Switch – Standard Model
In stock
$138.00 – $145.00TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics.
- Provides low profile, dual-device control for lights and lasers.
- TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the operator’s choosing.
- Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package.
2019 Updated Model! The TAPS Standard now features Unity Tactical built wire cables and wire leads.
Arisaka Defense Tailcap Adapter for Streamlight ProTac Rail Mount 1 & 2 – Convert to SureFire
Out of stock
$35.00The Arisaka Tailcap Adapter allows Streamlight Protac Rail Mount 1 and 2 lights to use Surefire Scout tailcaps and remote switches. In particular, the Protac Rail Mount lights can now be used with the Surefire SR-D-IT and TNVC/Unity TAPS dual switches, which are commonly paired with laser/illuminators like the ATPIAL and DBAL series.
One of the main flaws of the Protac Rail Mount lights is also addressed: Streamlight did not design a front battery spring into the light, so under recoil, the battery can come off the front contact and cause the light to flicker or blink. To help prevent this behavior the adapter includes a removable buffer o-ring on the front face which ensures the battery cannot move rearward while firing.
Compatible lights:
- Streamlight Protac Rail Mount 1
- Streamlight Protac Rail Mount 2
Cloud Defensive KeyMod Light Control System, Mount for SureFire ST07 Tape Switch – LCSmk1-d
Out of stock
$69.99 – $74.99- Unique Patented design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
- Precision CNC machined from Certified 6061 aluminum for superior strength.
- Proprietary dual cable control channels machined into the one-piece mount.
- Proprietary “Early Cable Exit” machined into each cable control channel. This allows you to only use part of the cable control channel should you need more slack in the cable to span across the handguard, et.
- 100% MADE IN THE USA
SureFire SR-D-IT Remote Dual Switch Assembly for Weaponlight + ATIPAL Laser Device
In stock
$122.00The SR-D-IT provides remote momentary-on activation, either separately or simultaneously, for two weapon-mounted illumination tools—a SureFire WeaponLight and an ATPIAL or DBAL laser. Separate plug-in cables connect each device to the switch platform, where two pressure-pad switches are integrated with a single snap-on clamp for easy attachment to your firearm’s Picatinny rail forend.
- Momentary-on switch activates SureFire WeaponLight and an ATPIAL or DBAL laser
- Weatherproof plugs and pressure pad switches
- Snap-on clamp for Picatinny rails
- Available with 7 inch switch cable