Used - Excellent Condition

LV Side Armor Bag Caps caps revolutionize the way users carry side armor. No longer does the end user need to have separate bags MOLLED onto their cummerbund to carry hard plates and soft armor at the same time.

• Combining both hard plate and soft armor bags into one item, we save material and space. This reduces the load on the user and helps in reducing bulk and heat
• Simply add a cap to our LV Side Armor Bags and you’re good to go
• LV Side Armor Caps are sold as a PAIR
• See size compatibility below

Featuring similar fiber optic materials used in several Trijicon® fiber optic scopes and sights, including the battle-proven ACOG®, the Trijicon® Fiber Sights are purposely engineered to bring the absolute brightest aiming point while retaining strength and maintaining a refined sight picture.

•  .060″ red fiber pre-installed on the front sight, and an extra red and green fiber replacement in the package
•  Thin front post (.110” width) allows for a refined sight picture in a variety of shooting environments and distances and gives a better field of view for longer range engagements
• Built using leading edge fiber technology and Trijicon’s legendary rugged metal construction
• Steeply hooked front surface of rear sight assists in emergency one-handed slide manipulations
• Rounded edges of rear sight reduce snag points for improved comfort while carrying

The LV-119 Rear Covert Plate Bag is part of the LV/119 SYSTEM.

• No external mounting that can get snagged or ripped off when exiting vehicles in haste.
• Creates a smooth profile when wearing underneath clothing.
• Designed to fit United States Standard Issue SAPI cut plates.
• Designed to be a scalable and highly configurable plate carrier platform.
• Medium-10″ x 12.5″
• Large- 10.25″ x 13.25″
• Thickness- MAXIMUM of 1.20″

The 5-Inch Elastic Cummerbund is a simple and effective solution for professionals who need to carry and have rapid access to additional ammunition and equipment on their sides while still maintaining a low profile.

• Elastic cells are 3 inches wide and are built around standard 5.56 Magazines, such as the PMAG.
• Elastic cummerbunds prevent user fatigue while worn for long durations.
• Materials sourced from industry leaders in textiles manufacturing.
• The cummerbund attaches inside the plate bag.
• The design creates a smooth profile when worn underneath clothing.

The Aimpoint Micro Mount s a one-piece unit that places the optic in a true absolute co-witness height.

• Precision machined from 6061 T6 Aluminum
• Hard coat anodized for a lifetime of performance
• Fully adjustable to fit both in spec and out of spec rail systems
• American Defense MFG, LLC. products feature a lifetime warranty
• Made with pride in the U.S.A.

FAST™ is a series of optic mounts and platforms that provide end-users with a quicker sight picture than standard height mounts. A 2.26” optical centerline height provides faster/easier reticle acquisition while wearing electronic ear-pro/communications headsets, night vision goggles, and gas masks.

• Height: 2.26”
• Weight: 3.2 oz
• Dimensions: 2 × 1.3 × 2 in
• Material: 7075-T6 Aluminum
• Finish: Type III Hardcoat
• Built in rear BUIS (can be used with Unity Fusion Front sights)
• Accepts American Defense QD Auto-Lock™
• Compatibility: Trijicon MRO, MRO HD, and MRO Patrol

Noisefighter’s toughest and most versatile mounting arm for the PVS-14.

• The AX14-PRO weighs only 0.9 oz / 26 g total, or approximately 52% less than a milspec J-Arm.
• The articulating knuckle permits full range of motion and tight stowing on both the left and right sides.
• The mechanism is pre-tensioned at the factory and should never need to be adjusted, but a simple hex key wrench may be used for adjustment as necessary.
• A slight rearward sweep of the inner arm helps position the monocular eyepiece closer to one’s eye and provides greater compatibility for those with larger helmets.
• Material: High-performance polymer from Arkema®. Milspec anodized aluminum. 316 stainless steel.
• Finish: Black
• Dimensions: 3.5 x 1 x 1.25″

REIN 3.0 is by far, the most powerful and most configurable weapon light ever made. With an upgraded electrical system, it brings you more capability. Nothing comes close. Delivering the power you need, in a small package. Everything you want it to be.

• 100,000 Candela peak beam intensity (With 18650)
• 1250 Lumens output (With 18650)
• 95 minutes run-time (With 18650)
• Dual-Fuel capability. REIN 3.0 runs on 18650 and now, can also run on two CR123 batteries. 18650 rechargeable battery provides the best output, by far. However, you can now use 2 CR123 batteries if needed. You will see reduced output with CR123 batteries.
• 1.3” Bezel diameter – smaller than the original REIN in diameter.
• 6.17” Long – a very compact full-size light.
• The same reduced mounting lug height as the REIN 2.0. Shorter than the original REIN 1.0 allowing for tighter mounting.

The SwitchBack® 2.0 adds a multi-function finger ring and a robust pocket clip to your tactical flashlight.

• Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring.
• Shoot using a natural two-handed grip (the SwitchBack Technique).
• Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries.
• Positively retain the light when drawing a firearm, reloading, and addressing a malfunction.

Thyrm developed the Low Profile Carry Clip (LPC Clip) to give your flashlight everything it needs, including less visual signature around town.

• See compatibility chart down below.
• Pocket clip with optimized retention force (also MOLLE compatible).
• Side grip texture and winglets for no-slip handling.
• Lanyard hole for additional retention options.
• Durable, non-conductive polymer construction that won’t scratch surroundings.
• Designed and made in the USA.

It has a slim enough profile to be concealed but is carefully balanced with enough flare to provide excellent grip control and aid in guiding your magazine into the frame with confidence and ease. This model easily accepts the factory glock backstraps provided with your pistol with no modification required. Made from precision machined, high-grade billet aluminum, the Velocity Magwell is plenty strong enough for the most demanding user. As with all of our products, the Velocity Magwell is made right here in the USA.

The Velocity Magwell will give you an instant feeling of quality and control!