The bags were built with an offset MOLLE configuration, which allows the user to wear the plates as far forward on the cummerbund as possible.

• The LV/ Side Armor Bags allow for the use of hard armor plates, soft armor inserts, or both hard and soft armor at the same time.
• Compatible with MOLLE cummerbunds and will not work with elastic cummerbunds.
• Built with stretch materials to accommodate 6 x 6-inch hard armor plates up to 1 inch thick in a stand-alone configuration.
• Offset MOLLE configuration allows the user to wear the plates as far forward on the cummerbund as possible.

The Thing 1 expansion chassis is a low-profile chest rig accessory designed to increase the load-bearing and storage capabilities of the core Micro Fight Chassis.

• Features two side pouches that will hold two 30-round 5.56 magazines, or any other equipment comparable in size.
• Lighter and more compact than the Thing 2.
• Designed to accept multiple types of pouch closures.
• The sides of the pouches also feature dual-use attachment interfaces.
• There are 4 single-column MOLLE attachment points (one on each side of the pouches).
• Shock cord loop pass-throughs designed to provide a low-profile tourniquet or glove storage solution.

The MOLLE back panel was designed to give LV/119 O V E R T users the ability to quickly swap out multiple rear bag loadout configurations based on the needs of a mission set. With its semi-rigid MOLLE frame, multiple anchor points, and quick zip installation, the MOLLE Back Panel is just as robust as a permanent sewn-in system while providing a near limitless set of pouch combination options.

• The MOLLE Back Panel features six columns of MOLLE across, and 12 slots down
• Provides ample real estate for attaching water bladders, wide pouches, or multiple small pouches side-by-side
• End users can now keep one plate carrier for all missions and simply swap out back panels that have been preloaded with specific equipment
• Swapping between MOLLE Back Panels takes less than a minute and requires no tools
• Allows operators to store additional back panels in vehicles or ready rooms for rapid deployment when needed

The AR-15/M4 Super Precision series of scope mounts are optimized for use with an AR-15/M4 upper.

• Mounting surface spans 7 picatinny sections and utilizes 4 shear lugs
• Mounts use Geissele’s update of the classic nut and bolt method for clamping the mount to the picatinny rail
• Each nut and bolt combination provides 1,400 pounds of clamping force, much more than any lever mounting arrangement
• Extended 34mm Model
• Height: Standard (1.54″)

Steiner brings battle-proven durability and mil-spec ruggedness to pistol red dots with the NEW MPS (Micro Pistol Sight).

• Enhanced extra sidewall that produces a best-in-class shock rating.
• The completely enclosed laser emitter is water pressure-tight.
• At 2.05 oz, the MPS is compact and lightweight.
• 8 brightness settings (two-night vision).
• 3.3 MOA dot allows fast and smooth target acquisition in any condition.
• The 13,000 hours of battery life puts the MPS on top of its class.
• The 1X magnification allows both eyes open operation and complete situational awareness.
• The MPS can be mounted on any gun Docter plate and is compatible with most other manufacturer adaptors available on the market.

The CompM5b™ is a high performance compact red dot sight that allows for ballistic compensation as well as wind or lead compensation adjustment.

• 2 MOA dot size
• 50,000 hours (over 5 years) of constant operation
• 4 night vision compatible settings and 6 daylight settings
• Weight 191 g (6.7 oz) sight only
• Submersible to 45 meters (150 feet)
• Height of Optical Axis 39 mm (1.5 in) measured from top surface of mechanical interface
• Advanced optical lenses for enhanced light transmission and ultimate dot clarity
• Includes: LRP Mount, Spacer, Flip-Up Lens Covers, 4 pcs Fixed Turrets, Custom Turret, Wind Turret, AAA Battery, Aimpoint® Tool, and Drill Tool

The best guard for big hands and gloved shooting. Especially in cold weather or tactical operations, you’ll need to upgrade for more room around the trigger. The B5 curved trigger guard is designed to accommodate gloved shooting, and even maintains the original swing-down feature for use with heavier winter gloves.

• Made of 6061 aluminum
• Milspec Type III anodized finish
• Drop-in upgrade
• Weight: 3.00 Ounces
• Width: 2.10 (in)
• Height: 0.53 (in)

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). These M-LOK covers are non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL, and SGA forends, and may not be compatible with free-float handguards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock-in.

• Includes six panels, each covering one M-LOK slot.
• Made in the USA.
• Non-orientation specific: No up / down, left / right, front / back orientation
• Contact surfaces made up of TSP
• Low Profile: Covers barely protrude more than 1/8″ above the rail surface
• Simple install and uninstall: Using a simple, pointed tool, covers can be installed or uninstalled in seconds

The Magpul Aluminum Rail is a 3-slot rail section for M-LOK compatible handguards and forends, allowing for the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

• Machined from milspec-anodized aluminum
• M-LOK Rail Sections feature beveled ends to reduce snagging and eliminate sharp corners and edges.
• All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
• 3 Slots, max overall length of 1.6″.
• Made in U.S.A.

The Arisaka Optic Leveler is an inexpensive, easy-to-use tool for leveling scopes mounted in rings or one-piece mounts. The base plate sits on the Picatinny rail or one-piece mount just below the turret cluster of the scope, and then the matching wedge is inserted from the side. As the 11 degree ramped surfaces of the wedge and base engage, the top of the wedge rises upwards and contacts the turret cluster, automatically leveling it.

• Combo Kit Included Small and Large Leveler
• Material: 6061-T6 clear anodized aluminum.
• Made in the USA.

The Arisaka Optic Leveler is an inexpensive, easy-to-use tool for leveling scopes mounted in rings or one-piece mounts. The base plate sits on the Picatinny rail or one-piece mount just below the turret cluster of the scope, and then the matching wedge is inserted from the side. As the 11 degree ramped surfaces of the wedge and base engage, the top of the wedge rises upwards and contacts the turret cluster, automatically leveling it.

• Material: 6061-T6 clear anodized aluminum.
• Made in the USA.

Upgrade your FAST™ Micro Mount by replacing the standard rail-grabber clamp mount with this drop-in American Defense Manufacturing® patented QD Auto-Lock™ Lever. This mounting option will provide quick detach capability. For current generation Unity FAST Mounts only.

Upgrade your Gen 1 FAST™ Micro Mount by replacing the standard rail-grabber clamp mount with this drop-in American Defense Manufacturing® patented QD Auto-Lock™ Lever. This mounting option will provide quick detach capability.